Welcome, Guest
Username: Password: Remember me

TOPIC: WINCNC Controller and Vectric Products Seminar

WINCNC Controller and Vectric Products Seminar 22 Jul 2016 03:35 #1

  • Michael Mezalick
  • Michael Mezalick's Avatar
  • Offline
  • Expert Carver
  • Posts: 117
  • Thank you received: 5
  • Points: 1030
  • Honor Medal 2015
Mark Your Calendars
September 22 - 24, 2016
CNC Seminars is excited to announce our next in a series of regional seminars,
Attendee driven topics that provide much needed real world information and guidance.

For more information cncseminars.com/events/colorado/


This seminar will focus on the WINCNC Controller and Vectric Products.

Providing information on the latest features of both and how they work best together.

Even though there will be benefit to all CNC users, the greatest benefit will be gained by users that have machines that operate on WINCNC and use the Vectric design software of all experience levels.

Our host for this seminar will be Tony Wish, of Coaldale, CO.

His location is the perfect spot to interact and ask questions about your machine and how you can apply effective methods to your CNC work.

For more information cncseminars.com/events/colorado/

WinCNC Class descriptions:

WinCNC Basics: Common Tasks and What's on the Screen

WinCNC Operation: Procedures to Ensure Ease of Daily Operation & Eliminate Errors

WinCNC Offsets & Positions: Set and Manage User Offsets, Position & Home #'s

Advanced WinCNC: Learn how to REALLY operate WinCNC, Learn to Read/Write GCode and Macros

WinCNC Advanced Tuning: Using Parameters to Tune your Machine to your Products


If you are really serious about knowing your machine and it’s inner working, then this seminar is not to be missed.


Three days only,,,September 22 – 24, 2016
Register now to reserve your seat..

cncseminars.com/events/colorado/

Only 20 seats will be made available so we can personally attend to your specific needs and questions.

We can always be contacted by email.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Hope to see you there.


3-D Modeling
Request a Quote
www.carveddetails.com

WINCNC Controller and Vectric Products Seminar 25 Jul 2016 15:12 #2

  • Michael Mezalick
  • Michael Mezalick's Avatar
  • Offline
  • Expert Carver
  • Posts: 117
  • Thank you received: 5
  • Points: 1030
  • Honor Medal 2015
There have been a number of inquiries regarding the WinCNC Training in Coaldale, CO.
All sessions use the OEM WinCNC provided screenset as an example. (See attached)
It does not matter which screenset you use, OEM branded or custom, they all use the features within WinCNC Control.

The screens may be a different color, the buttons may have different names and the macros you use could have slight nuances provided by the OEMs, but for the most part there is little difference under the hood.

Bring your problems or projects, I am sure that we will get you going in the right direction.

See you there,

www.cncseminars.com
3-D Modeling
Request a Quote
www.carveddetails.com
Time to create page: 0.544 seconds

Please Visit and Support Our Amazing Sponsors